Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen which allows for a write-to-write experience, whilst you are away from home. This is because of the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. Once the user really wants to write, he just places the pen into the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as if he is writing under a black mirror.
One of the greatest attributes of the Smok Pen is its ability to charge while it is on your own desk. The reason being the coils on the Smok Pen are designed in a way to help keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that is placed inside the Smok Pen. The 0.3-ohm coil ensures that even the slightest of air currents won’t affect the writing process. This is due to the electronic circuitry has protection built in so that it will never be affected by extremely low voltage electric currents.
The Smok Pen can be charged internally with a charger or via the USB connection that comes with it. Since the electronic circuitry has a safety barrier built in, therefore there is absolutely no risk involved when charging these devices through the computer. The Smok Pen includes a charging capacity of sixteen 50 mah batteries, that is ideal for all pens that use a couple of batteries.
To keep the Smok Pen doing work for an extended time period it is important that you do not overcharge the battery. Overcharging the battery will reduce the voltage that is available and may eventually result in the device malfunctioning. Overcharging the Smok Pen may also affect the vaporizing process. In the event that you feel that your battery is not getting the vapor it should, remove the pen from the energy source and let it cool down for a few minutes.
The fire button on the Smok Pen is situated in the bottom right corner of the device. The fire button comes with an orange light, which indicates that it’s on. You can press this button to activate the electronic heating element that will allow you to vaporize the oil. When you have done so you can remove the coil from the holder and stick it into the holder and place the Smok Pen in to the airflow chamber, that may cause the heating element to start heating up and burning off the wick.
Once the coil is taken off the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder plus they get vapinger.com heated from the airflow. Once they get hot they begin to turn blue, that is the indication that it’s ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then the oil will leak and cause the leaking of e-juice.
Before you put the battery into the pen, you must ensure that you have disconnected each of the leads. Then you have to take out the Smok Pen’s cap and locate the leak or drip tip. You must clean this with a little cotton bud, so that you can eliminate leak. Then reattach the cap back again to the Smok Pen and you will be ready to place the battery into the pen.
The ultimate area of the construction process is the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate allows you to charge your e-juice during your computer, so long as you have an adapter for USB connection. I really like this part as it allows me to charge my entire kit at once without fretting about running out of power or constantly running out of e-juice.